Easy operation
and upkeep at increased heights
Even with
increased height, Harmar’s CPL is engineered for fast installation,
easy operation, and is virtually maintenance-free indoors and out.
Designed with precision and care to be an incredibly high-quality,
code compliant access solution, Harmar’s Highlander series is sure
to meet your every need. Heights available from 4’ to 14’.
Features
Top-mounted motor and electrical box makes servicing easy and
eliminates potential water issues Ability to unbolt
the base to get the lift through small openings ETL
Listed Available in AC and DC models
Solid platform with non-skid surface for added safety
Solid 42” high guard panels Weather-resistant design
for indoor and outdoor use Constant pressure, paddle
switch controls with emergency stop button
Safety
Sensors on underside of platform stop at obstructions
Stationary access ramp
Weight Capacity: 750 lb (340 kg) Platform Size: 36” x
54” x 42” Speed: 10 FPM
Harmar’s Residential
Vertical Platform Lift (RPL) is a safe, smooth and economical solution
to the barriers, porches, staircases, decks and other elevation changes
can create in and around a home.
Safe, economical
solution to barriers, porches, staircases, and decks
Designed from the
ground up to be as cost-efficient as possible, the RPL is priced to be
competitive with shorter units but built to accommodate most residential
applications with ease. Available in heights from 4 to 6 feet and
for use indoors and out.
Features
Automatic, folding access ramp Available in AC and DC
models Solid platform with non-skid surface for added
safety Solid 36” high guard panels
Weather-resistant
design for indoor and outdoor use
Constant
pressure, paddle switch controls with emergency stop button
Sensitive safety
pan on bottom of platform stops the lift if it meets an obstruction
MAC PL50 The Mac’s Vertical Home Lift PL-50 is
designed and engineered for everyday home use. It is easy to
operate, easy to install and virtually maintenance free. Every
safety detail has been carefully designed in the Mac’s Vertical Home
Lift including a non-slip platform, constant pressure switches, a
low platform for easy access, safety ramp and railing with all
rolled edges.
The Mac's Vertical Home Lift PL-50 is built
to meet and exceed residential applications.
Mac's Vertical
Home Lift PL-50
The drive system uses
common household current and operates in all weather conditions, from
-30 degrees to +120 degrees. The key-operated, constant pressure switch
enables you to start, stop and change directions at any point, unlike
many of the other lifts out there. The electrical system is placed well
above ground and sealed against moisture. The lift is finished with an
automotive grade powder coat to further protect the lift against the
elements.
The Mac’s Vertical
Home Lift PL-50 is sturdy enough to lift and lower up to 750 lbs and
will accommodate most electric wheelchairs and scooters. In fact we ran
a PL-50 with a full 750 lb load,continuously on a cycle that lifted and
lowered the platform 1 time a minute, 60 times an hour, 1,440 times a
day with no rest. That lift ran for 3 months, outside on our roof and
completed over 129,600 cycles without fail or need for maintenance. So
if you were to use this lift 1 time a day your lift would run for over
355 years without a single lost day!
Mac's Vertical
Home Lift PL-72
You will not find a
better built product on the market for your money. We are so sure of
this that the Mac’s Vertical Home Lift PL-50 comes with a new 5 year
limited warranty, another first for this industry. With over 35 years
experience of manufacturing residential platform lift it is easy to see
why a Mac’s Vertical Home Lift PL-50 is your best and safest choice.
Make Life Accessible Again with a Mac's Extended Vertical Lift
The Mac’s Extended
Vertical Lift is designed and engineered for everyday home use. It
is easy to operate, easy to install and virtually maintenance free.
Every safety detail has been carefully designed in the Mac’s Vertical
Home Lift including a non-slip platform, constant pressure switches, a
low platform for easy access, safety ramp and railing with all rolled
edges.
The drive system uses
common household current and operates in all weather conditions, from
-30 degrees to +120 degrees. The key-operated, constant pressure switch
enables you to start, stop and change directions at any point, unlike
many of the other lifts out there. The electrical system is placed well
above ground and sealed against moisture. The lift is finished with an
automotive grade powder coat to further protect the lift against the
elements.
San Francisco Bay Area Mac's EVL-107 ADA Commercial Business
Mobility Lift
The Mac’s Extended
Vertical Lift is sturdy enough to lift and lower up to 750 lbs and will
accommodate most electric wheelchairs and scooters. We have lifting
heights available up to 107", 121", 134" and beyond. The highest we have
manufactured to date is 168" rise.
The Mac’s Extended
Vertical Lift is one tough, safe, reliable and affordable lift. Compare
it against all the competition.
You will not find a
better built product on the market for your money. We are so sure of
this that the Mac’s Extended Vertical Lift comes with a 2 year limited
warranty. With over 35 years experience of manufacturing residential
platform lift it is easy to see why a Mac’s Vertical Home Lift PL-50 is
your best and safest choice.
